Checking internet usage on the MoFi Gateway

The MoFi Gateway comes with a built-in bandwidth monitoring tool that allows you to monitor and manage your internet usage. Please follow the directions below to check your internet usage using this functionality: With a device connected to the Gateway (over WiFi or ethernet), launch a web browser (Internet explorer, Firefox, or Safari preferred) and […]

Read More

Initial setup for the MoFi Gateway

Unpack the following items from the packaging: 1 x MoFi Gateway (MOFI4500-4GXeLTE-V2) 2 x Flat 3G/4G/LTE/LTE2 antennas (UWM-MAXRANGE1) 2 x Round 2.4GHz WiFi antennas 1 x AC/DC power adapter Once these items are unpacked, please follow the directions below to setup your Gateway. Attach the 2 x Flat 3G/4G/LTE/LTE2 antennas to the antenna ports located […]

Read More

Updating the firmware for the Gateway

Click here to download and save the latest firmware version (ver 4.4.1-std) for your Gateway. Please make note of the download location as it will be needed later. Note: Updating the firmware will restore the Gateway to its factory settings. Please follow these steps to update the firmware for your Gateway: The Gateway will go […]

Read More

Reset the LTE Module

If encountering connectivity issues, and rebooting the Gateway does not help, please follow these steps to reset the LTE module in the Gateway: With a device connected to the Gateway (over WiFi or ethernet), launch a web browser (Internet explorer, Firefox, or Safari preferred) and go to 192.168.10.1. Login to the admin panel with your router password (maybe […]

Read More

‘Bandlocking’ the modem

Our service utilizes LTE Bands 2/4/5/12/30 to establish connectivity with the 4G LTE Network. By default, the LTE modem in the Gateway is programmed to connect to the strongest LTE Band, which sometimes may not be the fastest LTE Band depending on network traffic, available bandwidth, etc. Locking the LTE modem to a specific LTE […]

Read More

Setup IP Passthrough/Bridge Mode

IP Passthrough/Bridge Mode allows you to configure the Gateway as a modem only and utilize an external WiFi Router, Access Point, or WiFi Mesh System for WiFi connectivity. Please note: Enabling IP Passthrough/Bridge Mode will disable the Gateway’s WiFi capabilities. In order to enable IP Passthrough/Bridge Mode on the Gateway, please follow these steps: Go to […]

Read More